Concrete coatings in Prosser: garages, patios and utility rooms
Croc Coatings serves Prosser from our Tri-Cities satellite office in Richland. We coat garage floors, patios and utility rooms with polyurea and polyaspartic systems. Call 208-244-0694 or request a free online quote.
Call 208-244-0694Get A Free Quote
Free online quote ā¢ Free in-home estimate
Residential lifetime warranty
Between the Tri-Cities and Yakima, with weather from both
Prosser sits between the Tri-Cities and Yakima, so we look at both stations. Pascoās NOAA 1991ā2020 normals show a July high of 92.5Ā°F and about 7.6 inches of precipitation; Yakimaās show 89.9Ā°F and about 8 inches, with January lows near 24.0Ā°F. Both are hot, dry places in summer and cold at night in winter. Croc Coatings has installed 1,700+ floors across North Idaho and Eastern Washington, and our Richland office is the closest base for Prosser. Weather figures are from the NOAA 1991ā2020 climate normals for the Pasco Tri-Cities Airport and Yakima Air Terminal stations.
Two weather stations, one answer. Prosser is between the Tri-Cities and Yakima, and none of the NOAA stations we use is in town. The Pasco station counts about 112 days a year with a low at or below 32Ā°F, and Yakimaās counts about 147, so a Prosser slab sees plenty of freezing nights. The Kennewick patio and walkways in our Showcase, the nearest project we show, had deep cracks and staining addressed and moisture tested before a Penntek polyaspartic and polyurea system. Residential floors carry a lifetime warranty, and we have installed 1,700+ floors.
No Prosser listing yet, so we show Kennewick work
Our public Showcase has no Prosser listings today. We would rather say so than borrow someone elseās story, so the projects below are from Kennewick and are labeled that way. Ask us for Prosser references at the free estimate.
A garage and utility room together
A Kennewick job from August 2026 coated a garage and a utility room in 1/8-inch Tidal Wave flake after moisture testing and crack and joint repair. A garage and the room beside it can often be priced together.
A patio and its side paths
A Kennewick patio and its connecting walkways were coated in Limestone Hybrid in July 2026 after deep cracks and staining were addressed. Patios take sun and weather, so the crack repair matters as much as the finish.
What we coat in Prosser
OUR SERVICE AREA
Do you serve Prosser?
Yes. Prosser is part of the Tri-Cities-side area we serve from our satellite office in Richland. Travel is normally free; for a farther job we mention any charge up front.
Do you have Prosser projects in your Showcase?
Not yet, so this page shows nearby Kennewick projects and labels them that way. At the free estimate we can tell you about similar jobs near you.
How long will a Prosser garage take?
Most garages up to 900 sq ft (up to 3 cars) are installed in one day. Stay off the floor for 12-24 hours, and keep cars off it longer.
Can you coat a laundry or utility room?
Often yes. A Kennewick utility room on this page replaced worn vinyl and tile with a coating after moisture testing. We check the slab first and tell you in writing what is possible.
How do I get a price for a Prosser floor?
Request a free online quote or call 208-244-0694. We then schedule a free estimate, because price depends on size, hardness, moisture and repairs. Our residential work carries a lifetime warranty.
Nearby projects from our Showcase (Kennewick)
There are no Prosser listings in the public Croc Coatings Showcase yet, so these photos are from three Kennewick jobs, the nearest recent projects we show. The stories paraphrase their write-ups.
Garage and utility room, Kennewick (nearest project)
The August 2026 write-up describes moisture testing, crack and joint repair and surface preparation, then a speckled-finish system across a garage and utility room. The Showcase lists the flake as 1/8-inch Tidal Wave. See this project in the Showcase.
Patio and walkways in Limestone Hybrid, Kennewick (nearest project)
The crew addressed deep cracks and significant staining, tested moisture, then applied a multi-layer polyaspartic and polyurea Limestone Hybrid system to the patio and side paths. The write-up says it hides previous damage. See this project in the Showcase.
Utility room in Quartzite Hybrid, Kennewick (nearest project)
This August 2026 job replaced worn vinyl and tile in a laundry and utility area that had peeling and adhesive problems. After thorough moisture testing and preparation, a non-porous hybrid coating went down in Quartzite Hybrid flake. See this project in the Showcase.
WHY CHOOSE CROC COATINGS?
Driveway Coatings
Driveway aprons coated for grip and UV resistance.
Commercial Coatings
Shops and small commercial spaces; commercial work carries a 5-year commercial warranty.
Concrete Coatings
Walkways and side paths like the nearby Kennewick job on this page.
Epoxy Flooring
Utility rooms and interior floors coated after moisture testing.
Epoxy Garages
Garage floors in Tidal Wave, Limestone Hybrid and more.
Chip Concrete Coatings
Chip floors in speckled and solid blends.
Garage Coatings
Garages of one to three cars, often completed in a day.
Patio Coatings
Patios with repaired cracks and a UV-resistant topcoat.
Pool Deck Coatings
Pool surrounds with a non-slip surface.
The nearby Kennewick projects below show a garage, a patio and a utility room.
What Prosser customers get from Croc Coatings:
- A Tri-Cities satellite office that serves Prosser
- One-day installation for most garages up to 900 sq ft
- A residential lifetime warranty
- A free online quote and a free estimate
- Moisture testing before every coating
- Crack and joint repair during prep
- Nearby Kennewick jobs shown and clearly labeled
Call 208-244-0694 to book a free estimate in Prosser. We will test the slab and tell you what it needs.
How It Works
How a Prosser floor is installed:
1: Preparing Your Floors
A diamond grinder opens the concrete, with HEPA vacuums holding down dust.
2: Repairing Your Floors
Cracks and joints are repaired with Penntek menders.
3: Applying the Base-Coat
A Penntek polyurea base-coat is rolled out and primes the slab.
4: Hand-Casting the Chip
Flake is broadcast by hand over the wet base-coat.
5: Scraping the Chip
The cured floor is scraped and vacuumed to remove loose flake.
6: Sealing the Clear Coat
A polyaspartic UV-resistant clear coat is rolled on to finish.
Where We Service
- Prosser
- Benton City
- West Richland
- Richland
- Kennewick
- Pasco
- Yakima
Call 208-244-0694 to confirm your Prosser address is on our route. Croc Coatingsā Tri-Cities satellite office is at 1333 Tapteal Dr, Richland, WA, the address pinned on the map above.
Nearby Areas We Serve
Prosser is part of our Tri-Cities-side service area. See our Tri-Cities hub and the Kennewick and Pasco pages.
SEE WHAT OUR CUSTOMERS SAY OUR CUSTOMERS SAY
Read what customers say about Croc Coatings on our reviews page.
Schedule a Free Consultation
Have a Prosser garage or patio in mind? Request a free online quote and we will schedule a free estimate.
