Concrete coatings in Benton City: garages, porches and steps from the nearby Richland office
Croc Coatings serves Benton City from our Tri-Cities satellite office in Richland. We coat garage floors, porches and steps with polyurea and polyaspartic flake systems. Call 208-244-0694 or request a free online quote.
Call 208-244-0694Get A Free Quote
Free online quote ā¢ Free in-home estimate
Residential lifetime warranty
A small town close to the Richland office
Benton City is west of Richland in the Tri-Cities area, so we use the Pasco station for weather: NOAAās 1991ā2020 normals show a July average high of 92.5Ā°F, about 7.6 inches of precipitation a year and January lows near 27.8Ā°F. That means strong sun and little rain on most garage slabs. Croc Coatings has installed 1,700+ floors across North Idaho and Eastern Washington, and a short drive from our Richland office keeps scheduling simple. Weather figures are from the NOAA 1991ā2020 climate normals for the Pasco Tri-Cities Airport station, the nearest station we use.
Porch steps take the worst of it. Edges and steps tend to lose concrete first, because water can reach them from several sides. The Pasco station we use for Benton City records about 112 days a year with a low at or below 32Ā°F, and about 20 days when the low is at or below 20Ā°F. The Richland porch and steps in our Showcase, the nearest project we show, had weathered concrete ground and structural cracks repaired before a Penntek polyaspartic finish with Limestone Hybrid flake. We say plainly that it is a Richland job. Our lifetime warranty covers residential floors.
No Benton City listing yet, so we show nearby work
Our public Showcase has no Benton City listings today. We would rather say so than borrow someone elseās story, so the projects below are from Richland, the nearest city with recent jobs, and they are labeled that way. Ask us for Benton City references at the free in-home estimate.
What a Richland garage looked like
A Richland garage from August 2026 shows what a Pebble Beach flake finish looks like once the clear coat has cured. The crew tested moisture, repaired hairline cracks and prepared the surface before the coating went on.
Porches and steps get attention too
A Richland porch and steps from the same week were coated in Limestone Hybrid after the crew ground the weathered concrete and repaired structural cracks. Steps and porches take wear and weather, so the repair work matters as much as the flake.
What we coat in Benton City
Nearby projects from our Showcase (Richland)
There are no Benton City listings in the public Croc Coatings Showcase yet, so these photos are from two Richland jobs, the nearest recent projects we have. The stories paraphrase their write-ups.
Pebble Beach garage, Richland (nearest project)
This August 2026 Richland garage began with moisture testing and surface preparation. The crew repaired hairline cracks and imperfections, then finished with a Pebble Beach 1/4-inch flake coating, described as resilient and easy to keep clean. See this project in the Showcase.
Porch and steps in Limestone Hybrid, Richland (nearest project)
The crew ground weathered concrete and repaired structural cracks on a Richland porch and steps. A multi-layer polyurea and polyaspartic system finished with Limestone Hybrid flake, which the write-up calls slip-resistant. See this project in the Showcase.
OUR SERVICE AREA
Do you serve Benton City?
Yes. Benton City is part of the Tri-Cities area we serve from our satellite office in Richland. There is normally no travel charge, though some outlying projects have one, and we tell you before you decide.
Do you have Benton City projects in your Showcase?
Not yet, which is why this page shows two nearby Richland projects and labels them that way. At the free in-home estimate we can tell you about similar jobs near you.
How long will a Benton City garage take?
Most garages up to 900 sq ft (up to 3 cars) are installed in one day. We ask you to wait 12-24 hours before walking on the floor and longer before driving on it.
Can you coat porches and steps?
Yes. The nearby Richland job on this page covered a porch and steps in Limestone Hybrid after cracks were repaired. We check the concrete, then tell you in writing what we can do.
How do I get a price for a Benton City floor?
Request a free online quote or call 208-244-0694. We then schedule a free in-home estimate, because price depends on size, hardness, moisture and repairs. Our residential work carries a lifetime warranty.
WHY CHOOSE CROC COATINGS?
Driveway Coatings
Driveway aprons coated for grip and UV resistance.
Commercial Coatings
Shops and small commercial spaces; commercial work carries a 5-year commercial warranty.
Concrete Coatings
Walkways, porches and steps like the nearby Richland job on this page.
Epoxy Flooring
Interior rooms coated after moisture testing.
Epoxy Garages
Garage floors in Pebble Beach, Limestone Hybrid and other blends.
Chip Concrete Coatings
Chip floors in a full range of flake colors and sizes.
Garage Coatings
Garages from one bay to three cars, usually done in a day.
Patio Coatings
Patios with repaired cracks and a UV-resistant topcoat.
Pool Deck Coatings
Pool decks coated for grip.
The nearby Richland projects below show a garage floor and a porch with steps.
What Benton City customers get from Croc Coatings:
- A Tri-Cities satellite office in nearby Richland
- One-day installation for most garages up to 900 sq ft
- A residential lifetime warranty
- A free online quote and a free in-home estimate
- Moisture testing before every coating
- Crack and joint repair during prep
- Nearby Richland jobs shown and clearly labeled in our Showcase
Call 208-244-0694 to book a free in-home estimate in Benton City. We will test the slab and list any repairs.
How It Works
How a Benton City floor is installed, in six steps:
1: Preparing Your Floors
A diamond grinder opens the slab, with HEPA vacuums to hold dust down.
2: Repairing Your Floors
Hairline cracks and joints are repaired with Penntek menders.
3: Applying the Base-Coat
A Penntek polyurea base-coat is mixed and rolled on.
4: Hand-Casting the Chip
Flake is broadcast by hand across the wet base-coat.
5: Scraping the Chip
The cured floor is scraped and vacuumed to remove loose flake.
6: Sealing the Clear Coat
A UV-resistant polyaspartic topcoat is rolled on to finish.
Where We Service
- Benton City
- West Richland
- Richland
- Kennewick
- Pasco
- Prosser
- Yakima
Call 208-244-0694 to confirm your Benton City address is on our route. Croc Coatingsā Tri-Cities satellite office is at 1333 Tapteal Dr, Richland, WA, the address pinned on the map above.
Nearby Areas We Serve
Benton City is part of our Tri-Cities service area. See our Tri-Cities hub and the Richland and Kennewick pages.
Benton City Floor Coating Guides
SEE WHAT OUR CUSTOMERS SAY OUR CUSTOMERS SAY
Read what customers say about Croc Coatings on our reviews page.
Schedule a Free Consultation
Have a Benton City garage or porch in mind? Request a free online quote and we will schedule a free in-home estimate.
